Metal Coil/Flats: Same Day Pick Up In Arizona

Products

LOOKING FOR STANDING SEAM METAL ROOFING INSTALLATION VIDEOS?

WESTERN LOCK® STANDING SEAM METAL ROOFING

Gutter Eave Trim - Part #WS-408

The eave trim that sits inside the gutter is only needed if the inside of the gutter will be visible. If you don't install the eave on the inside of the gutter, then the inside color of the gutter will be different from the outside color of the gutter.

Pre-hung box gutter detail 

Gutter Accessories

WS-415 - GUTTER WITH EAVE TRIM - PARTS LIST

Components List

  • 1 Piece Pre-Hung Box Gutter - WS-415
    Roof Pitch Required
  • 1 Piece Joggle Cleat - WS-403
  • 1 Piece Gutter Eave Trim - WS-408
  • 5 Pieces Gutter Strap- WS-412
  • 2 Pieces Gutter End Caps - WS-414
    You Will Need 1 Left & 1 Right At Gutter Ends
  • 10 Pancake Head Screws (#10X1") NO Washer
    Verify Metal To Wood or Metal To Metal
  • 16 Rivets
  • 20 Linear Feet Of Double Sided Butyl Tape, 3/16" X 7/8"
  • 1/4 Tube Of Butyl Sealant
  • 1/4 Tube Silicone Sealant
  • 10 Linear Feet Of 8" Wide Sharkskin Ultra SA - Self Adhesive Roofing Underlayment

If you have more than one piece of gutter for each gutter run then it will require the following additional pieces:

  • Gutter Splice - WS-413
  • 12 Rivets
  • 1/4 Tube Of Butyl Sealant

WSMR Recommends the use of a water barrier or underlayment prior to the installation of the trim components or metal roofing panels.

We recommend:

Optional Gutter Eave Trim

Gutter Installation For Standing Seam

Step by step pre-hung box gutter installation instructions for standing seam metal roofing. 

  • End Caps
  • Gutter Splice
  • Optional Gutter Eave Trim
  • Gutter Straps

Learn More

Just in case you forgot

ADDITIONAL ITEMS YOU MAY NEED...